Some DTR users have said they end up with the rod sticking straight out from their body so it's hard to go out in public without people noticing the rod poking at their pants. Some users have said the pusher rod and plate presses their penis far enough into their body that it bothers them after a while. And still other users say they end up with a thick wad of skin on the bell which becomes uncomfortable trapped under the gripper after a while.One DTR user came up with this installation method to solve all three situations at once. His method has been tried since by many others who agree it does the following:
1. gives you a longer "hang" so the rod does not poke your pants,
2. moves the DTR further from your body so the rod doesn't press into your body as far, and
3. results in a much thinner skin tube on the DTR's bell for better comfort, fewer wrinkles, and unique tension.
Follow the installation the guide on the left. Leave any questions or comments at http://restoringforeskin.org by browsing to Forums | DTR, where you'll also find a short installation video demo and other member comments.
1. gives you a longer "hang" so the rod does not poke your pants,
2. moves the DTR further from your body so the rod doesn't press into your body as far, and
3. results in a much thinner skin tube on the DTR's bell for better comfort, fewer wrinkles, and unique tension.
Follow the installation the guide on the left. Leave any questions or comments at http://restoringforeskin.org by browsing to Forums | DTR, where you'll also find a short installation video demo and other member comments.
Robert Shows another way to install the DTR.
Ideas and tips from other users.
Click picture to pop up full screen image
By putting a second gripper ( playtex style ) anyone needing a larger gripper can make a playtex gripper and either use it with or without the original gripper. This happens very rarely and is a good solution for anyone who needs a larger gripper and is having trouble with the original gripper due to having thicker skin.
Grippers are not hard to make. Please click here for more info on how to make a gripper. With one or both gripper you can tailor the room to fit your needs.
Grippers are not hard to make. Please click here for more info on how to make a gripper. With one or both gripper you can tailor the room to fit your needs.
This is something that does not happen often but for those having difficulty it does offer a cheap and easy solution.
Don't be afraid to experiment with the DTR. This is how discoveries and improvements are made.
Don't be afraid to experiment with the DTR. This is how discoveries and improvements are made.
Depending on how much room you need you can use original DTR grippers on the bell and add the wide gripper on the outside much like the double grip method but with more room between the grippers for guys that have really thick skin.
Wide gripper
Alternative DTR installing
Broken nylon screw
About the only part that could break on a DTR is the nylon screw, (the ones that hold the elastic) These can break if stepped on. If this happens you can remove it as shown.
Drill out the screw from the opposite side. Just slide the drill bit into the opposite hole on the other side of the broken screw.
Go slow and try to stay in the center so you don't drill the threads. As you drill the broken screw starts to turn itself out.
If you do break a screw this is the best way to get it out. If you don't feel your up to the challenge you can send the bell back to me and I will do it for you Free.
Go slow and try to stay in the center so you don't drill the threads. As you drill the broken screw starts to turn itself out.
If you do break a screw this is the best way to get it out. If you don't feel your up to the challenge you can send the bell back to me and I will do it for you Free.
use a drill bit that is smaller then the hole.
( 5/64th or 1/16th ) is a good size to use.
( 5/64th or 1/16th ) is a good size to use.
Padding the push plate
There might be times where a little padding will help your glans from getting tied of restoring for long periods or high tension. This was a trick I did before inventing methods like the Inner grip , Air and Conform plate that I now use regularly. Sometimes my glans would need a little break and these little pads did the trick.
These little cosmetic rounds can be found in most department stores and drug stores, they can be cut smaller if needed and last a few days each. These are a soft latex pad used to apply make-up.
It looks to big but it really shrinks down a lot and works out great.