The keeper is made from a Condom Catheter. ( Bell Skin ) This can be a great way to keep the skin from rolling back and forth over the glans when at that "almost there" Stage of restoring.
Clings extremely well to skin and allows me to retract the skin to urinate without removal.
Caution! Restoring too aggressively can lead to injuries such as skin tears and bruising or possible other damaging injuries that I am un aware of. Always use your own judgment on how you choose to restore. Pain is not part of restoring. The information on this web site is to show how I personally choose to restore and is not intended as instructions or medical advice on how everyone should restore. What you choose to do with this information you do at your own risk.
An important note, when it comes to retaining and sleeping. This is something that every individual will have to make his or her own decision on. What I will tell everyone is that if you are thinking of using something when you are sleeping please test this out during the day while you are awake. You will also more then likely experience nocturnal erections. This will put more pressure on the skin when you are using restoring or retaining methods.
See how long you can wear what ever it is you plan on wearing at night during the day to see if it's going to bother you after a long duration of time ( like 8 hours ). I never advise using anything when sleeping. Always Use your own judgment.
I was thinking there has to be a better way to keep the skin over the glans when a person hits that stage of restoring where the skin seems to have a mind of its own and will not STAY forward over the glans. This would be good for guys that are at that CI- 5 + stage
Please keep in mind when you make one the first few tires you use it its going to be a pain in the ass because its new. Wash it with soap and water first. After it breaks in they are much easy to put on.
I am using a 36 mm Condom catheter or ( Bell skin ) as I like to call them. I unroll the catheter.
Next using scissors I will cut most of the catheter off and only leave about 3/4 to 1 inch worth of the bottom section.
I will now cut off most of the top section leaving about 1/2 inch to 3/4 inch of the tapered top section. This section of the catheter is thicker then the bottom.
I don't worry about making it perfectly round and even. This is what they normally look like after I cut them down. The slight taper is what I am looking for.
Now the taper side is facing left in this picture. The bottom section of the catheter will face down the shaft of my penis. So the taper side will be at the end of my foreskin.
I will pinch my the end of my foreskin with my finger that are inside the Keeper.
While I pull the skin with one hand I can work the Keeper over the foreskin. This is easier then it looks. I can adjust the Keeper so that its positioned just right.
This is how I like to position the Keeper. The keeper clings to the skin very well and will stay in this position all day long. After weeks of testing I have yet to have one come off on its own.
The catheter thickness works perfect. The slight taper is enough to keep the foreskin over the glans without any pressure on the skin or glans.
The material is also thin enough so that It will expand when I retract my foreskin over the glans to urinate.
I can simply move it forward back over the glans and be good to go. This has worked out extremely well at keeping the skin forward all the time without any feeling of wearing it what so ever. I can use it all day long and I have even slept with it on and had no issues doing so.
I do not recommend sleeping with any device or retaining method. What you choose to do with this information you do so at your own RISK! I am just saying its like wearing nothing.
Right now I use a 36 mm size. That happens to be close to what my skin over my glans measures out to.
So someone with a thinner or thicker penis might need a different size.
can be found on the parts page
I may get more sizes then just the 36 mm I have now in stock.
They can be washed and reused and I have yet to wear one out even after months of testing it for 16 hours a day.
I have urinated without retracting the Keeper and it works fine.
Could this create a taper to the foreskin over time ? The O-ring theory created a "band" around my foreskin. So lets see if using a keeper for the rest of 2018 changes anything.
It can be adjusted so you can have more of less skin hanging out from the end.
I personally have been using it with more skin hanging out like you see in this picture. I feel it puts a little stress on the skin to give it a slight push over the glans. I am hoping over time this little push will continue to promote more skin growth.
This I believe this simple idea could have lots of potential. Please feel free to send me some feedback if you are trying this method.
This was sent in by another restoring man using the keeper